Recent Posts

Posts Tagged ‘Saving’

Amazon Kindle How-to Series: Saving E-books and Audio Books on Your Kindle

One of the great features of the Kindle Wireless Reading Device from Amazon is that it holds so many e-books and audio books. Even with it’s fairly large built-in storage however, your book collection might exceed the limits of what can fit on your Kindle. 

To help you handle your growing collection of e-books and audio books, the you can add extra memory to your Kindle in the form of an SD memory card. You can purchase these cards in many sizes from 1 GB up-to 16 GB. At the time you read this 32 GB cards may readily be available and affordable. Installing SD memory in your Kindle is straightforward. You can find complete instructions in our Kindle How-To Series available in the web-site listed below.

Once you have your memory card installed it’s time to move some of the e-books or audio books stored in your Kindle’s main memory to your new SD Card. There are a few things you should consider first before “making the move.”

1. Audio books are a good candidate for moving from your Kindle’s main memory to the SD card. Audio book files can be large – some are up-to 90 mb or more. Audio books will quickly consumer your Kindle’s main memory leaving less space for your e-books.

2. If you’ve purchased books that are on the Amazon digital site and have yet to be sent to your Kindle these also might be good candidates to load onto your SD memory card. This will keep all of your e-books and audio books in one place in-case you run into a situation where you do not have wireless access.

3. Pictures, music files, and digital files other than e-books also consume a lot of space in the Kindle’s main memory. Again, this makes them good choices to move to the new SD card you’ve installed in your Kindle.

Now – let’s take a look at your Kindle and get ready to save some files to your SD memory card. Here are the steps you can follow to do this -

A. Turn on your Kindle

B. Move the scroll wheel to “Menu” and press to select the Main Menu

C. Scroll to “Content Manager” on the Main Menu the press to select the Content Manager

D. Once the Content Manager screen opens take a look at your list of audio books and e-books – pay specific attention to the storage location of the book listed directly under the first word of the title –

a. “Kindle” – the book is stored in your Kindle’s main memory

b. “SD Card” – any books you’ve moved to your SD Card will have this location

c. “Amazon” – books you’ve purchased but that have not been downloaded to your Kindle will have this location

E. Choose a book now located on your Kindle by scrolling to the location of the book and pressing the scroll wheel to “select” the book. When you do this you will notice an “x” in the box immediately to the right of the book’s title.

F. Next scroll back down to “Menu” at the bottom of the Kindle screen and press the scroll wheel to select.

G. When the Menu opens, scroll to “Move to SD Card” and press the scroll wheel to select.

H. Once you do this you will notice the location icon will show the book is being transferred to your Kindle’s SD memory card. For example you will see an arrow pointing from the “Kindle” location to the SD Card location.

I. When the move is complete the location icon below the title will change from “Kindle” to “SD Card” – this is how you know the transfer process is complete.

That’s all there is to it! You’ve now learned how-to quickly save books from your Kindle’s main memory to the SD Card you’ve installed in your Kindle.

Complete instructions with photos can be found at the web site in the resource box below.

Do you own an Amazon Kindle or are you thinking about getting one? Go to www.guidetokindle.com for free information, FAQs, and how-to tips and help make your e-books and audio books even more enjoyable.

HOT Electronic Gadgets deal of the Month - 8GB Apple IPOD
Click here to get the cheapest Apple 8GB Ipod deal online - Includes free delivery.

Three Amazing New Energy Saving Devices For the Home You Simply Must Know About

One of the major shortfalls of home energy saving devices of the past was that for the most part, they simply weren’t cost effective. Sure the technology was amazing and very heartening to see it come up, but face the facts. In the end, it was always cheaper to just keep on wasting the electricity. Seriously! Who would spend $100 to save $20? It was, to say the least, a very tough sell.

There Was Always the Convenience Issue

At the same time convenience was always an issue. You see, as much as people wanted and in some cases were even willing to pay for these earlier energy saving products for the home, they tended to be bulky and not very easy to apply. What was need were “simple to use” compact solid state devices that could be simply plugged in and used just like an alarm clock.

TV Standby Time Is Like Throwing Away Money While You Sleep

So now check out new affordable compact power saving devices like  the new PowerSaver TV standby saver. “Say what!?” “So what on earth does it do to save me money?” OK! Get ready because this happens to be one of the most common sense home energy savers out there. What it does is completely eliminate TV power standby time.

This One Pays For Its self Very Quickly – Then the Rest Is Pure Savings

You see, when your TV is turned off, it is still drawing power to remain active for when the clicker is used to turn it on. Up to 70% of normal operating power is used while your TV is “turned off”! This device plugs into the power outlet and then the TV is plugged into it, completely shutting off all power to your TV. Simply press the on button for the TV on your remote and power is resumed to your TV and it comes on just like normal.

Finally Cheap Replaceable Energy Saving “Curly” Bulbs

Another clever innovation involves those energy saving “screw in light bulbs” with the “curly tubes” that replace normal energy gulping bulbs. They are a fantastic bulb but if you’ve gone and checked them out at the home supply store, they can be a little pricey. You see, its the complex electrical hardware contained in their base that keeps their cost up. The “curly bulbs” are in fact cheap to manufacture.

Who’s the Genius That Thought Of That?!

Some solutions are just too easy and its scary that it took so long for someone to figure them out. You see, now you can buy these energy scrimping bulbs as a two part system. This means that while you do pay for the expensive base as with other bulbs of this type, there is one big difference. That is when the bulb burns out, you simply unplug the “curly bulb section” and plug a new replacement back on the base. You use the base over and over again!

No More Wondering About Appliance Energy Consumption

The third device is one that you will wonder how you have been getting along with one all these years without. Its a small compact energy monitor with an easy to read screen. Simply plug it into the wall socket, then plug “whatever” into it and with a quick glance you can see how much electricity the device is using. Hey! Its great for room-mate situations to settle any questions about energy consumption.

Chris Tyrrell writes for Ecofreak, an environmentally friendly online shop specialising in energy saving products such as the Wattson”>http://www.ecofreak.co.uk/products/0/107/Wattson-Energy-Meter.html”>Wattson. Visit the website for more details.

HOT Electronic Gadgets deal of the Month - 8GB Apple IPOD
Click here to get the cheapest Apple 8GB Ipod deal online - Includes free delivery.

Powered by Yahoo! Answers